I will create a vehicle wrap and signage layout print ready

I will create a vehicle wrap and signage layout that arrives print-ready: correct scale, full-bleed, with vetted panel seams and weld lines, packaged on a USB drive and mailed to your door.

What you get

You get a complete, production-grade vehicle wrap and signage layout built to the exact dimensions of your vehicle or sign substrate, prepared so any wide-format print shop can run it without re-drawing a single line. This is a design-and-output service for the artwork itself; I do not print the vinyl or install it on your vehicle, and the finished files are delivered as a physical package mailed to you.

• A full vehicle wrap layout drawn to a 1:1 or scaled-to-spec template (sedan, SUV, van, box truck, trailer, food truck, or fleet unit) covering the panels you order: sides, rear, hood, and roof as applicable.
• Or a flat signage layout for storefront signs, banners, yard signs, A-frames, channel-letter backers, window graphics, or wall wraps sized to your substrate.
• Correct bleed (typically 0.25 inch or per your printer's spec), safe margins, and crop/registration marks where the shop needs them.
• Panel and seam planning so artwork lands cleanly across door gaps, handles, fuel doors, mirrors, and body lines, with key elements kept out of high-distortion and overlap zones.
• Vector-based logos, type, and shapes wherever possible so the work scales without pixelation; supplied raster imagery placed at print-ready effective resolution.
• A correct color setup for your output (CMYK for solvent/latex/UV roll-to-roll, with spot/brand colors called out so the shop can match them).
• Print-ready files: layered working file plus flattened, press-ready PDF/EPS, and high-res raster exports if your printer requests them.
• A flattened JPG/PDF proof and a mock-up showing the design on the vehicle or sign shape so you can approve before anything goes to print.
• A short, plain-language hand-off note listing dimensions, bleed, color mode, fonts, and how the panels are split, so your print shop has zero guesswork.
• Everything loaded onto a USB flash drive and shipped to your address.

Plans

Feature	Basic	Standard	Premium
Project type	Single flat sign or banner layout	Partial wrap (two sides or rear) or multi-sign set	Full vehicle wrap (all ordered panels) or fleet template
Print-ready PDF/EPS export	Included	Included	Included
Scaled-to-spec template & bleed	Included	Included	Included
Panel/seam & body-line planning	Basic	Included	Advanced, full coverage
On-vehicle / on-sign mock-up	1 view	2 views	Multiple angles
Source/working file	Optional	Included	Included
Revision rounds	Light	Moderate	Generous
Reusable fleet master template	Not included	Optional	Included
Files mailed on USB	Included	Included	Included

How it works

1. You place your order and send me your vehicle year/make/model (or exact sign dimensions and substrate), the panels you want covered, your logo and brand assets, any photos or copy, and your print shop's spec sheet if you have one.
2. I confirm the correct template and measurements, flag anything missing (low-res logo, no spec sheet, unclear sizing), and agree the layout direction with you before drawing.
3. I build the layout to scale on the proper template, placing artwork around real-world obstacles and body lines, and set bleed, margins, and color mode for your output.
4. I send you a flattened proof and an on-vehicle or on-sign mock-up for review.
5. You request revisions; I refine type, color, scale, and placement until it's right and within the revision rounds for your plan.
6. On final approval I export the print-ready file set, load it onto a USB drive, and mail it to your shipping address with tracking where available.

Why choose this

A wrap or sign only looks as good as the file behind it, and most reprints and ruined installs trace back to artwork that was the wrong size, missing bleed, in RGB, or laid out without thinking about where the door handles and seams fall. I build the file the way a print shop actually wants to receive it: real dimensions, correct bleed, CMYK with named brand colors, vectors kept sharp, and panels planned so the design survives contact with a three-dimensional vehicle. You get a clean approval proof and a mock-up up front, a documented hand-off so your printer doesn't have to phone you with questions, and a tangible USB copy in hand rather than a link that expires. The goal is simple: hand the drive to any competent wide-format shop and have them print it right the first time.

Who it's for / use cases

• Small business owners turning a work van, truck, or car into rolling advertising.
• Tradespeople (plumbing, HVAC, landscaping, electrical, mobile detailing) who need a clean, legible wrap with phone number and services.
• Food trucks and mobile vendors wanting eye-catching, appetite-driven graphics that read at a distance.
• Fleet operators needing one consistent master template repeated across many vehicles.
• Real estate, rideshare, delivery, and courier drivers adding branding or partial decals.
• Retail and storefront owners who need matching exterior signage, banners, window graphics, or yard signs.
• Print shops and resellers who want clean, press-ready artwork built to their spec without tying up in-house designers.

FAQ

Q: Do you print and install the wrap? No. This service produces the print-ready design file only, mailed to you on a USB drive. You take that file to any wide-format print shop for printing and installation. I'll prepare it to your shop's exact specs so it runs smoothly.

Q: How do you get the right size for my vehicle? I work from year/make/model templates scaled to real dimensions, or from measurements and a spec sheet you provide. If your print shop supplies its own die-line or template, I'll build directly onto that so it matches their press exactly.

Q: What files will I receive? A flattened press-ready PDF (and EPS where useful), a layered working file on Standard and Premium, high-res raster exports if your printer asks for them, plus a flattened proof and an on-vehicle or on-sign mock-up, all on the USB drive.

Q: Can you design from scratch if I only have a logo? Yes. As long as you provide a usable logo and basic brand info, I can build the full layout, color scheme, and composition. A vector or high-resolution logo gives the best result; I'll tell you early if what you sent won't hold up at print size.

Q: What if my logo is low resolution? I'll flag it before drawing. I can often rebuild simple logos as clean vectors so they print crisp at any scale; complex or photographic logos may need a usable source from you to avoid blurry output.

Q: How many revisions are included? It depends on your plan: Basic includes light revisions, Standard moderate, and Premium generous rounds. Revisions cover type, color, scale, and placement on the existing concept. A full redesign in a new direction is treated as new work.

Q: How long until it ships? Design time depends on scope (a single sign is faster than a full wrap or fleet template) and on revision turnaround. Once you approve the final proof, I export, load the USB drive, and mail it promptly with tracking where available. Shipping transit time then depends on your location.

Q: Can you match my exact brand colors? Yes. I set the file in the correct color mode for your output and call out your brand colors as spot/named values so the print shop can match them. Exact on-vinyl color also depends on the printer and material, which is why I document the color targets in the hand-off note.